satishku_2000
05-22 04:06 PM
DID YOU EVER MOVE WITHOUT REPORTING A CHANGE OF ADDRESS?? IF YOUR ANSWER IS YES, THEN YOU ARE ALSO AN ILLEGAL... YOU QUALIFY FOR A Z VISA!!! YEPEEE!!!
If thats the case then I think at least some people are safe ...:)
If thats the case then I think at least some people are safe ...:)
wallpaper Women Hairstyles: curly short
Kitiara
02-12 04:52 AM
Kit your castle was wild, was it done from a photograph? Yeah, I used one of my old holiday snaps as a reference. One of the places I used to get taken on holiday to when I was a kid was up near Gloucester, and there was this old ruined castle. Used to love going there, and in the middle of this battle I suddenly remembered it and dug out my old photos. Had that next to me while I was drawing it. :)
trueguy
02-20 11:45 PM
Hi
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
Immigration office can come to your home to check on you if your application is family based, like spouse living together or not. But since you are on H1B, I don't know why would they come to your home. They should check with ur employer and do the verification.
This is just my opinion.
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
Immigration office can come to your home to check on you if your application is family based, like spouse living together or not. But since you are on H1B, I don't know why would they come to your home. They should check with ur employer and do the verification.
This is just my opinion.
2011 short curly hairstyles
gcnirvana
07-07 09:00 PM
Yes, the video was submitted by mbawa2574 before. I also felt better after watching the news on a national TV. I think finally our problems are getting some attention. With the San Jose rally, Flower campaign and hopefully rallies in other cities (which should happen sooner before this issue dies down), we have a very good chance of getting a positive outcome.
It was for about 2 minutes. The first time this issue got TV coverage I guess.
Anyone captured it on video?
It was for about 2 minutes. The first time this issue got TV coverage I guess.
Anyone captured it on video?
more...
belmontboy
05-18 09:37 PM
For a moment, leave the IIT/merit/experience arguments aside...fact is US graduate schools get taxpayer funds...and one way or other students graduating in US get benefit from those taxes. Senators do not want their tax $$ investments to leave the country...that only is the reason they did something for US graduates in H1...this separate quota may or may not fly...as there is no direct benefit for US...stay on H1B and pay taxes good for usa :cool:
wrong.
Each MS student invests atleast 20k for his program [average]. He/She doesnot get any benefit from taxes. However, its the university benefits from foreign students. If you take CS/EE/science program atleast 50% of students would be foreigners [avg].
One of the main reasons why a Master's quota of 20k was added was to retain the "US educated" talent. I suppose we could argue on similar terms for GC quota for Masters students.
wrong.
Each MS student invests atleast 20k for his program [average]. He/She doesnot get any benefit from taxes. However, its the university benefits from foreign students. If you take CS/EE/science program atleast 50% of students would be foreigners [avg].
One of the main reasons why a Master's quota of 20k was added was to retain the "US educated" talent. I suppose we could argue on similar terms for GC quota for Masters students.
Soul
02-02 06:30 PM
That hasn't been a rule in any past battle...
If we like another entry what doesn't it hurt to vote for it? In fact I think it's a good thing :beam:
- Soul :goatee:
If we like another entry what doesn't it hurt to vote for it? In fact I think it's a good thing :beam:
- Soul :goatee:
more...
jjava100
01-13 03:52 PM
I took Lufthansa and traveled in November via Frankfurt with out a valid visa and did not had any issues with the transit visa. I had visa while coming back.
2010 short wavy haircuts pictures
mallu
02-20 04:46 PM
Can anybody estimate out of the 47000 identified cases that is affected by Name Check...
How many are real old PD's like
Prior to 2003
Between 2003 and 2005
Between 2005 and 2007
India / China / Mexico / ROW
.
How many are real old PD's like
Prior to 2003
Between 2003 and 2005
Between 2005 and 2007
India / China / Mexico / ROW
.
more...
JakeLeone
07-21 06:57 PM
Hi,
If you check the bright future jobs website, you will not find any reference to such a "Call".
Beware, calling the number might expose your phone number, and you might become a victim.
Please be aware law enforcement has been notified, if anyone encounters any problems as a result, please contact law enforcement.
I hope the deranged person who originally posted the message can receive help soon.
BTW, if "Antis" is your calling card (it's rarely used in reference to those participating in the immigration debate) you might have exposed yourself a little too much.
If you check the bright future jobs website, you will not find any reference to such a "Call".
Beware, calling the number might expose your phone number, and you might become a victim.
Please be aware law enforcement has been notified, if anyone encounters any problems as a result, please contact law enforcement.
I hope the deranged person who originally posted the message can receive help soon.
BTW, if "Antis" is your calling card (it's rarely used in reference to those participating in the immigration debate) you might have exposed yourself a little too much.
hair house short curly hair styles
x1050us
07-19 03:20 PM
I am with you on that one :) No point taking a risk for a few dollars.
As I already mentioned it is not about $$$. It is about getting an appointment at consulate. Anyways, I managed to prepone the appointment now. So everything should be smooth.
As I already mentioned it is not about $$$. It is about getting an appointment at consulate. Anyways, I managed to prepone the appointment now. So everything should be smooth.
more...
plassey
08-23 02:52 PM
Here comes one more preacher. Most people on this forum are no saint, they not even a man (or woman) enough to stand up for themselves.
We are a Union and thats how a union works that is actively supporting the cause of its members.
If one is stupid enough not to understand that we are trying to help everyone and thus this "one help" need to be demanded then god help that person.
Understood, we all may have problems but those could be solved with whatever our share of work we can do to support this cause.
If someone says that they don't know what IV policies and activites are and blames that nobody explained to them. Well... thats a lame excuse. It is very much on the front page of IV
Number is the bargaining power and we are here to bargain. Period.
Yes, u got that right. I am one angry man and regret that what I am doing goes against the spirit of IV.
Now my direct question to you is : are in or are u out?
Dear plassey,
Whatever IV is doing fine, nobody here denies that. But here are few points which I think eveybody else is trying to convey, which somehow you don't understand:
1. This site has an open forum where not only active members of IV, but other people (cowerds, that is what you think, you out-spoken fellow) also seek advice, share their experiences and hence help each other. And mind you, because of these all people, IV and this site also get so much popular.
2. The other point is WHY YOU PUSH SO MUCH FOR HELP. I think everybody understands the efforts of IV, but let the person decide himself/herself whether he/she wants to give money, go to DC ralley or not. Help is not demanded.
3. Please mind your language. I don't know why you have so much of anger and you use abusive, disturbing language for others. Its very easy to say a F* word, but very difficult to sort out others problems in decent and graceful manner. I don't think any group like IV (CARE, CRY and hundreds of NGOs in India) will push people like you do.
4. And people like you are shame for a group like IV (please ask pappu too to confirm) who spread negativity like you did in this thread.
You need some help to suppress your anger. Please do that Dear plassy...
We are a Union and thats how a union works that is actively supporting the cause of its members.
If one is stupid enough not to understand that we are trying to help everyone and thus this "one help" need to be demanded then god help that person.
Understood, we all may have problems but those could be solved with whatever our share of work we can do to support this cause.
If someone says that they don't know what IV policies and activites are and blames that nobody explained to them. Well... thats a lame excuse. It is very much on the front page of IV
Number is the bargaining power and we are here to bargain. Period.
Yes, u got that right. I am one angry man and regret that what I am doing goes against the spirit of IV.
Now my direct question to you is : are in or are u out?
Dear plassey,
Whatever IV is doing fine, nobody here denies that. But here are few points which I think eveybody else is trying to convey, which somehow you don't understand:
1. This site has an open forum where not only active members of IV, but other people (cowerds, that is what you think, you out-spoken fellow) also seek advice, share their experiences and hence help each other. And mind you, because of these all people, IV and this site also get so much popular.
2. The other point is WHY YOU PUSH SO MUCH FOR HELP. I think everybody understands the efforts of IV, but let the person decide himself/herself whether he/she wants to give money, go to DC ralley or not. Help is not demanded.
3. Please mind your language. I don't know why you have so much of anger and you use abusive, disturbing language for others. Its very easy to say a F* word, but very difficult to sort out others problems in decent and graceful manner. I don't think any group like IV (CARE, CRY and hundreds of NGOs in India) will push people like you do.
4. And people like you are shame for a group like IV (please ask pappu too to confirm) who spread negativity like you did in this thread.
You need some help to suppress your anger. Please do that Dear plassy...
hot Perky Short Curly Hairstyle
Vsach
07-17 10:31 AM
Well it will be a big relief for us as family, my wife can pick up a job, my son is in high school...yes...we will take it!
more...
house 2011 super short haircuts for
xu1
04-01 03:38 PM
sent..
i was IMing with a friend working for microsoft and trying to tell him about IV. he had already been a contributing member! :)
i was IMing with a friend working for microsoft and trying to tell him about IV. he had already been a contributing member! :)
tattoo short curly hairstyles for
araj_98
04-03 08:47 AM
Sent faxes!
more...
pictures Nice Short Curly Hairstyle
punjabi
09-19 08:06 PM
Anna,
This is childish. Sorry!
LOL!
Funny that I am not upset at your questions, but are you really serious??
What were you thinking all this time when the rally was going on? Did you really think the lawmakers would sit together over a dinner yesterday and hand over a favorable decision in the breakfast next morning?
Just wait! If we don't get something favorable, we will do MORE and BIGGER.
...and next time, we'll also pick you up to the rally to carry our autograph books...hehe..just kidding.
This is childish. Sorry!
LOL!
Funny that I am not upset at your questions, but are you really serious??
What were you thinking all this time when the rally was going on? Did you really think the lawmakers would sit together over a dinner yesterday and hand over a favorable decision in the breakfast next morning?
Just wait! If we don't get something favorable, we will do MORE and BIGGER.
...and next time, we'll also pick you up to the rally to carry our autograph books...hehe..just kidding.
dresses black short curly hairstyles.
needhelp!
01-16 02:45 PM
please vote if you sent your letters
more...
makeup short hair styles for black
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
girlfriend 2010 Short Curly Hairstyles
ItIsNotFunny
06-20 07:50 AM
in short ,,they stop processing ur case once ur date rerogresses....!!!
No! They keep processing but don't send final approval once your date is retrogressed.
No! They keep processing but don't send final approval once your date is retrogressed.
hairstyles Tags: short curly hairstyle,
meridiani.planum
06-04 05:32 PM
Ron,
"
E. EMPLOYMENT THIRD PREFERENCE VISA AVAILABILITY
Demand for numbers, primarily by Citizenship and Immigration Services Offices for adjustment of status cases, is expected to bring the Employment Third preference category very close to the annual numerical limit in June. As a result, this category is likely to experience retrogressions or visa unavailability beginning in July. Such action would only be temporary, however, and a complete recovery of the cut-off dates would occur for October, the first month of the new fiscal year.
"
How do you see above message in the June Visa Bulletin? This means it is illegal to use all of them with in 3 quarters????
I don't wish to sound like Bill Clinton, but it depends on how you define "is." In this case, if they are using "annual limit" to mean the entire annual quota, then they are admitting that they have broken the law and issued too many visas in the first three quarters. Worse, they offer no explanation for having broken the law.[/COLOR]
Well, they could be talking about a subset of the annual quota, such as the quarterly quota. From the context, I don't think that is the case, but I'm also not used to seeing the State Department flat out admit illegality, either.
Well, if they do broke the law, can we do something about it? Like class action law suite???
Let's see if they did, first.
class action lawsuit?? for using up too many visa's too fast?
wow. for once (& only once) I feel sad for USCIS. They are damned if they do, and damned if they dont. Usually all talk of class action lawsuits have been for visa numbers that they wasted by approving too slowly. Now another one for going too fast... :D
"
E. EMPLOYMENT THIRD PREFERENCE VISA AVAILABILITY
Demand for numbers, primarily by Citizenship and Immigration Services Offices for adjustment of status cases, is expected to bring the Employment Third preference category very close to the annual numerical limit in June. As a result, this category is likely to experience retrogressions or visa unavailability beginning in July. Such action would only be temporary, however, and a complete recovery of the cut-off dates would occur for October, the first month of the new fiscal year.
"
How do you see above message in the June Visa Bulletin? This means it is illegal to use all of them with in 3 quarters????
I don't wish to sound like Bill Clinton, but it depends on how you define "is." In this case, if they are using "annual limit" to mean the entire annual quota, then they are admitting that they have broken the law and issued too many visas in the first three quarters. Worse, they offer no explanation for having broken the law.[/COLOR]
Well, they could be talking about a subset of the annual quota, such as the quarterly quota. From the context, I don't think that is the case, but I'm also not used to seeing the State Department flat out admit illegality, either.
Well, if they do broke the law, can we do something about it? Like class action law suite???
Let's see if they did, first.
class action lawsuit?? for using up too many visa's too fast?
wow. for once (& only once) I feel sad for USCIS. They are damned if they do, and damned if they dont. Usually all talk of class action lawsuits have been for visa numbers that they wasted by approving too slowly. Now another one for going too fast... :D
axp817
04-03 09:55 AM
Thanks for contacting IV with your SOS.
An IV core member is going to be helping you to fix this with USCIS. Let us know if you need help. He already tried contacting you yesterday.
As IV grows maybe this is a help IV can extend to all its donor members and help them if they get in such extreme distress situations. This is one of the ideas we are thinking for our members in the donor group.
+1. That is fantastic.
An IV core member is going to be helping you to fix this with USCIS. Let us know if you need help. He already tried contacting you yesterday.
As IV grows maybe this is a help IV can extend to all its donor members and help them if they get in such extreme distress situations. This is one of the ideas we are thinking for our members in the donor group.
+1. That is fantastic.
Soul
02-16 07:45 PM
Oh and when do you think it will be added to the past winners?
- Soul :goatee:
- Soul :goatee: